Fiberglass Fabric 6522 4OZ 27" Wide Surfboard Glassing Laminating Durable Cloth

Build Your Surfboard

Modern design surfboard blanks are made from two materials of foam. They are PU polyurethane and EPS polystyrene. Current most boards are made of PU foam blanks and laminated by Polyester resin.

After shaping the foam blank, it’s laminated/glassing. This process uses resin and e-glass fiberglass fabric to seal the foam board and improve the tensile strength. Modern surfboards are laminated with 4 ounce and 6 ounce fiberglass cloth. The resins can be polyester resin without the addition of sanding solution and epoxy resin.

Then,prepare the fiberglass cloth: lay the fabric over the foam. Then resin is applied with a squeegee to evenly distribute and saturate the resin in the e-glass cloth. The process should be repeated on the bottom too. And warp the rails of surfboard and blend the cloth over each side. Once the board is laminated and the fin plugs are put in, sanded or gloss finishing should be done to make the surfboard appears better.

Laminating Fiberglass Cloth

4oz 6522 e-glass fiberglass fabric is a light weight, fire resistant and high tensile strength woven cloth. It is flexible so that easy to fabricate and apply to the board deck. 4oz, 6oz and 8oz are standard weight for surfboard glassing (laminating). These economical fabrics with durability can improve the surfboard in high tensile trength but low weight.

When using the fiberglass cloth for glassing, almost all stock standard shortboards are used two layers of 4oz glass on the deck, and one layer on the bottom (4+4×4). And for team boards is 4×4 or 4+4(3/4 patch) x4, for strong glass job: 4+6×6, for standard malibu glass job: 6+6×6. 4oz 27.5 inches width are suitable for shortboard. Our standard roll length is 100 meters.

Data Sheet

Unionfull is able to produce the fabric as the customer's requirement.

Properties

1. Fiberglass cloth roll 100 meters
2. Durable, lightweight
3. Chemical resistance
4. Anti corrosion
5. Easily to be wet out by resin
6. Easy to fabricate, flexible
7. Electrical insulation

Application

• Surfboard / boat building
• Printed circuit board
• Pipe anti-corrosion
• Septic tank, pool building
• Wire cable electronic insulation​

Pictures

Unionfull® Group Ltd is a quality environment friendly (ISO - 9001 & 2008) modern, hi-tech enterprise specialized in manufacturing of Thermal Materials and Heat Resistant Materials, such as Fiberglass Fabric, Silica Cloth, Silicone coated Fiberglass Fabric, Needle Mat and so on. Unionfull Group Ltd,. China Thermal Products supplier provides a comprehensive range of products including:

        1) Fiberglass Fabric

        2) Thermal Insulation Materials

        3)  High Silica Fabric

        4) Silicone Coated Fiberglass Fabric

        5) Fiberglass Needle Mat

        6) Glass Roving

        7) Fiberglass Fire Blanket

        8) Welding Blanket

Our products are used by some of the very well known industrial houses in the Petrochemical, Power, Cement, Steel, Chemical, Pharmaceutical, Gas and Process Industry.
We heavily export our products to different companies / industrial houses in the UK, US, Europe, Australia, Africa and the Middle East.

Unionfull Group Ltd is your premier supplier of industrial thermal insulating, welding and cutting protection and safety products.

Tel: +86-573-89601588-

Fax: 4008266163-8807

Phone:+86-18668332131

Whatsapp:+8618668332131